Silicone Rubber Corona Treater Sleeves

SILICONE RUBBER CORONA TREATER SLEEVE

FEATURES :

  • Do not break or crack under unusual web tension.
  • Require much lower web tension.
  • Due to sleeve treat can be operated with much  smaller air gap.
  • Easy to replace
  • Good Electrically Insulation.
  • Ozone Corona discharge resistance.
  • Suitable for continuous operation at 180º C & can be operated at higher temperature without loss of any mechanical & dielectric properties.
  • Having high dielectric strength 250-500 Votts/mm.
  • Resilient & flexible for case of Insulation on to treatment roll.
  • Long Life
  • Size available from 2” ID to 8” ID & wall thickness 2.00mm to 5.00mm (±0.2mm)
  • Normally available from stock in opaque color.
  • Special size & color available on request.

SPECIFICATION :

  • Appearance Transculent.
  • Hardness : 60-70 Shore  A.
  • Density: – 1.2
  • Temperature:-  – 80º to 250º C. (-110º to 480º F)
  • Elongation at break 500%
  • Tensile Strength:- 11.0Mpa
  • Tear Strength – 24kgf/cm
Send Quick Inquiry


Fine Rubber India